Replace Toilet Tank Valve

Replace Toilet Tank Valve. The toilet fill valve is located inside the toilet tank, usually off to one side. This project involves shutting off the water and disconnecting the fill valve, then removing the toilet tank from the bowl in order to remove and replace the flush valve.

How to Replace a Toilet Tank Fill Valve · Share Your Repair from 2.bp.blogspot.com

There is an air filled cup or ball which is connected to the fill valve. If the new valve has a nylon nut on the bottom, remove it. Afterward, pull the supply line out of the valve below the tank.

When to replace your toilet fill valve.

The first thing you want to do is go to the side of the tank and shut the water off to the toilet tank. Turn the handle on the valve fully clockwise to shut off the water. 4.3 be careful while tightening the fill valve: Then remove the top of the tank and set it down on the towel.

This should serve you for 5 years or more.

Turn off the water at the shutoff valve and drain tank by flushing the toilet.

4.2 ensure all the gaskets are in exact place:

To replace a toilet flush valve you will first need to turn off water supply to the toilet and then drain the tank.

To replace a toilet flush valve you will first need to turn off water supply to the toilet and then drain the tank.

However, the shortcut method may also be applied to many other brands of toilet flush valves.

3.5 trace the toilet fill valve:

This project involves shutting off the water and disconnecting the fill valve, then removing the toilet tank from the bowl in order to remove and replace the flush valve.

A faulty fill valve may cause water leakage from the toilet tank.

Lokasi:

Berbagi :